Allan, K. Next step is to monitor the call and verify that the DIALOPTIONS are getting used. Place a call that you know isn't working and look in the Asterisk CLI (with 'core set verbose 5') for the Dial(...) line and verify that it has the tThHkK settings.
-- Ryan Brindley Digium, Inc. | Software Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA main: +1 256-428-6000 fax: +1 256-864-0464 Check us out at: http://digium.com & http://asterisk.org ----- Original Message ----- From: "Allan Harte" <[email protected]> To: "Asterisk GUI project discussion" <[email protected]> Sent: Tuesday, March 3, 2009 3:56:12 AM GMT -06:00 US/Canada Central Subject: Re: [asterisk-gui] Cannot park calls Hi The features page has all the Dial Options selected. Extensions.conf has DIALOPTIONS = tThHkK set in the [Globals] context From: [email protected] [mailto:[email protected]] On Behalf Of Ryan Brindley Sent: 02 March 2009 18:40 To: Asterisk GUI project discussion Subject: Re: [asterisk-gui] Cannot park calls Allan, Look on the Features page and then under 'dial options' and verify that the 't', 'T', 'k' and 'K' options are activated. You can also look in extensions.conf and verify that DIALOPTIONS has tTkK. These are need for the call parking feature to work. You can read more about Call Parking http://www.voip-info.org/wiki-Asterisk+call+parking if it helps any. -- Ryan Brindley Digium, Inc. | Software Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA main: +1 256-428-6000 fax: +1 256-864-0464 Check us out at: http://digium.com & http://asterisk.org ----- Original Message ----- From: "Allan Harte" <[email protected]> To: [email protected] Sent: Monday, March 2, 2009 11:45:10 AM GMT -06:00 US/Canada Central Subject: [asterisk-gui] Cannot park calls Hi Im having problems parking calls in AsteriskNow. This was working until I upgraded to GUI Asterisk Build: Asterisk/1.4.18.1 Asterisk GUI-version : 2.0 The include is working as it is picking up my pickup group number *30 Features.conf [featuremap] blindxfer = #1 disconnect = *0 atxfer =*2 [general] parkext = 700 parkpos = 701-720 context = parkedcalls parkingtime = 180 pickupexten = *30 [applicationmap] Show Features results Builtin Feature Default Current --------------- ------- ------- Pickup *8 *30 Blind Transfer # #1 Attended Transfer *2 One Touch Monitor Disconnect Call * *0 Park Call Dynamic Feature Default Current --------------- ------- ------- (none) Call parking ------------ Parking extension : 700 Parking context : parkedcalls Parked call extensions: 701-720 After upgrading the GUI I had to start adding includes into the [Default] context as other areas also stopped (i.e. VoiceMail) however the parkedcalls include is in my extensions.conf [Default] include=page include=intercom include=internal include=voicemenu include=voicemenu-custom-1 include=parkedcalls exten=_#6XXX,1,VoiceMail(${EXTEN:1...@default,s) exten=6050,1,VoiceMailMain exten=7000,1,Goto(voicemenu-custom-1,s,1) exten=o,1,Goto(default,215,1) exten=500,1,VoiceMailMain(${CALLERID(num)}) exten=300,1,Goto(ringroups-custom-2,s,1) exten=301,1,Goto(ringroups-custom-1,s,1) exten=302,1,Goto(ringroups-custom-3,s,1) exten=304,1,Goto(ringroups-custom-4,s,1) Any help here would be very welcome. Allan _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-gui mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-gui _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-gui mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-gui
_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-gui mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-gui
