yes u r right, & i myself had discovered this prob, & i infact posted two further posts after the one that u(Matt.) responded, but don't know y did'nt those two posts get on to the asterisk-ss7 lists right after my previouse post. ok here r those:
############post-1############
lately i've discovered that after compiling asterisk-trunk, i dont have any chan_zap.so file in my /usr/lib/asterisk/modules/, that is y asterisk while running is unable to load the chan_zap.so & because of it, it do not do anything about zap, ....am i right?
if yes then what should i do to correctly compile the asterisk-trunk to get the chan_zap.so (i already have tried make & make install twice but did'nt get chan_zap.so both times in my /usr/lib/asterisk/modules/, though chan_zap.c is present in asterisk-trunk folder)
if yes then what should i do to correctly compile the asterisk-trunk to get the chan_zap.so (i already have tried make & make install twice but did'nt get chan_zap.so both times in my /usr/lib/asterisk/modules/, though chan_zap.c is present in asterisk-trunk folder)
#############################
###########post-2#############
okay Matt.! now some how after fixing that chan_zap.so prob (by rechecking once again all the three packages), now when i run the asterisk with forcefully loading the chan_zap.so modules by loading it into modules.conf
, it gives the following error about djpointcode & sigchan as;
------------CLI eror log-----------------
.
.
[Oct 14 07:28:18] NOTICE[4070]: loader.c:793 load_modules: 1 modules will be loaded.
== Registered application 'ZapSendKeypadFacility'
== Parsing '/etc/asterisk/zapata.conf': Found
[Oct 14 07:28:18] ERROR[4070]: chan_zap.c:11272 linkset_addsigchan: Unspecified adjpointcode!
.
.
.
res_features.so => (Call Features Resource)
== Parsing '/etc/asterisk/smdi.conf': Found
[Oct 14 07:28:18] WARNING[4070]: res_smdi.c:726 load_module: No SMDI interfaces are available to listen on, not starting SDMI listener.
[Oct 14 07:28:18] WARNING[4070]: pbx.c:2818 ast_register_application: Already have an application 'ZapSendKeypadFacility'
== Parsing '/etc/asterisk/zapata.conf': Found
[Oct 14 07:28:18] ERROR[4070]: chan_zap.c:11222 linkset_addsigchan: Unable to open SS7 sigchan 16 (Device or resource busy)
.
.
.
----------------------------------------------
and here r my zapata.conf & zaptel.conf
-----------------zapata.conf--------------
channels]
context=zapIncoming
switchtype=euroisdn
usecallerid=yes
hidecallerid=no
echocancel=yes
echocancelwhenbridged=yes
musiconhold=default
signalling = ss7
ss7type = itu
linkset = 1
;pointcode = 0x1680
pointcode = 05760
;djpointcode = 0x168a
djpointcode = 05770
;djpointcode = 05-10-10
;defaultdpc = 0x168a
djpointcode = 05770
;defaultdpc = 05-10-10
networkindicator=national
cicbeginswith = 1
sigchan = 16 ; First signaling channel
channel=>1-15,17-31
;channel=>1-15
;cicbeginswith=17
;channel=>17-31
-----------------------------------------------
---------------zaptel.conf-----------------
pan=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16
-----------------------------------------------
now i think the problem is quite identified, so plz suggest me what should i do to solve this
------------CLI eror log-----------------
.
.
[Oct 14 07:28:18] NOTICE[4070]: loader.c:793 load_modules: 1 modules will be loaded.
== Registered application 'ZapSendKeypadFacility'
== Parsing '/etc/asterisk/zapata.conf': Found
[Oct 14 07:28:18] ERROR[4070]: chan_zap.c:11272 linkset_addsigchan: Unspecified adjpointcode!
.
.
.
res_features.so => (Call Features Resource)
== Parsing '/etc/asterisk/smdi.conf': Found
[Oct 14 07:28:18] WARNING[4070]: res_smdi.c:726 load_module: No SMDI interfaces are available to listen on, not starting SDMI listener.
[Oct 14 07:28:18] WARNING[4070]: pbx.c:2818 ast_register_application: Already have an application 'ZapSendKeypadFacility'
== Parsing '/etc/asterisk/zapata.conf': Found
[Oct 14 07:28:18] ERROR[4070]: chan_zap.c:11222 linkset_addsigchan: Unable to open SS7 sigchan 16 (Device or resource busy)
.
.
.
----------------------------------------------
and here r my zapata.conf & zaptel.conf
-----------------zapata.conf--------------
channels]
context=zapIncoming
switchtype=euroisdn
usecallerid=yes
hidecallerid=no
echocancel=yes
echocancelwhenbridged=yes
musiconhold=default
signalling = ss7
ss7type = itu
linkset = 1
;pointcode = 0x1680
pointcode = 05760
;djpointcode = 0x168a
djpointcode = 05770
;djpointcode = 05-10-10
;defaultdpc = 0x168a
djpointcode = 05770
;defaultdpc = 05-10-10
networkindicator=national
cicbeginswith = 1
sigchan = 16 ; First signaling channel
channel=>1-15,17-31
;channel=>1-15
;cicbeginswith=17
;channel=>17-31
-----------------------------------------------
---------------zaptel.conf-----------------
pan=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16
-----------------------------------------------
now i think the problem is quite identified, so plz suggest me what should i do to solve this
#############################
so plz now respond according to having these two posts right after my previous post (in which i've already mentioned, what the CLI error log says abt zap --- keep in mind that chan_zap.so did'nt load autometically rather i forcefully loaded it through 'load' command in
modules.conf)
waitin for the responces
On 10/14/06, Matt Fredrickson <[EMAIL PROTECTED]> wrote:
It sounds like chan_zap.so didn't load... You need to look at what happens when you load asterisk, to see why chan_zap.so is not loading.
Matthew Fredrickson
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-ss7
