Goke Aruna wrote:
yusuf wrote:
Hi,
So today I started getting to know chan_ss7. The issue is I want to
test chan_ss7, but I only have 1 Asterisk box and 1 4-port Diiagium E1
card. I want to know, and please understand my ignorance of ss7 :),
if I only have 1 box, with a Digium 4 port E1 card, and I want to dial
out on port1 and recieve the call on port2, do I configure two links
with one linkset, or two seperate linksets (I am following the templates)
Also, with the above config, is this correct:
[link-l1]
linkset => outgoing1
channels => 1-15,17-31
schannel => 16
firstcic => 1
enabled => yes
[link-l2]
linkset => incoming2
channels => 1-15,17-31
schannel => 16
firstcic => 32
enabled => yes
is my channels labled correctly?
Yusuf,
with what you pasted, it should be 2 linksets. however, i guess first
cic on the second e1 should be 33 not 32.
the schannels should not be specified on the second link, since you have
only one signalling link for the two links.
Hi,
is that two linksets with two links or two linksets with four links.
Am I a being amazingly stupid even asking that?
What is a link, what is a linkset, and what is the difference, and the
relaionship between them?
--
thanks,
Yusuf
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
