Hi...
Ok Matt...but explain me if i do a "vi /var/log/asterisk/messages" ....i see
chan_dahdi.c : Detected Alarm on Channel 1 : Red Alarm ...this continues till
Channel 31 ...Are you still sure that its a problem from operator end cos last
time when i posted the message :
--------------------------------------------------------------------------------
Sriram wrote:
> Thanks ! now chan_dahdi.so was seen under the modules of asterisk..but
> another prob :( whenver i get to asterisk CLI and give the module load
> chan_dahdi.so ...it exits with the following error :
>
> Unable to load chan_dahdi.so , command 'module load chan_dahdi.so'
> failed...the debug msg shows :
>
> [sep 14 03:52:06] WARNING[30185]:chan_dahdi.c:4290
> handle_alarms:Detected alarm on channel 1:Red Alarm --registered channel
> 1, ss7 signalling
>
> i see this till channel 15 after which it exits saying cant set sigchan
> on channel 16....the operator is still doing some chnages at his end but
> i just want to confirm if this is some issue at his end or my end
>
> thanks- sriram
That is an issue with your end. Make sure you signalling is set to
either mtp2 (if it's a Digium card) or dchan if it's not in
/etc/dahdi/system.conf.
Matthew Fredrickson
--------------------------------------------------------------------------------you
replied as above but at that time i wasnt getting chan_dahdi.so to load which
is not the case this time around...Please confirm so that i ask the operatorand
tell him that i dont get SIO or SIOS messagesthnks a tonSriram
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
