Hello,
The config are correct according from telco:
signalling=ss7
ss7type=itu
ss7_called_nai=dynamic
ss7_calling_nai=dynamic
networkindicator=national
pointcode=781
linkset=1
pointcode=XXX
defaultdpc=YYY
adjpointcode=YYY
context=from-pstn-01
group=1
cicbeginswith=1
channel=>1-15
cicbeginswith=301
channel=>17-31
sigchan=16
I'll see the cables, but the link is UP:
Description Alarms IRQ bpviol CRC Fra Codi
Options LBO
AP408 Card 1 Span 1 OK 0 0 0 CCS
HDB3 0 db (CSU)/0-133 feet (DSX-1)
Thanks a lot
--
Marcus
________________________________
De: Kaloyan Kovachev <[email protected]>
Para: Marcus Vinicius <[email protected]>; [email protected]
Enviadas: Segunda-feira, 28 de Maio de 2012 6:18
Assunto: Re: [asterisk-ss7] ALIGNMENT Problem
Hi,
On Thu, 24 May 2012 06:47:28 -0700 (PDT), Marcus Vinicius
<[email protected]> wrote:
> Hi,
>
> I can't alignment a libss7 Asterisk with a TDM switch (Huawei/UMG)
because
> the link doesn't pass the "PROVING" state.
>
> All configurations are correct according from telco, but I always get
the
> same logs:
check your cables and double check your config for the correct signaling
channel
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
