Hello, We would be ineterested to get such a device. Most E1 channel banks are too expensive compared to T1 channel banks (I have no idea why). So, any CB at a cost lower than 2000$ is ceratinly interesting.
Best regards, Vlasis. "Dooley, Brendan" wrote: > Our company manufactures an E1 channel bank that is approved for use in > Australia (it should also be compatible with Euro standards). It is modular > and available in 10, 20 or 30 analog port configurations. Signal monitoring > and configuration is via Ethernet. > > These units are manufactured in low quantities for specific telco > requirements. However if there was enough interest, we would be able to > manufacture and sell the units at pricing levels under US $2000. > > So how much interest is out there? > > Brendan > --------------------------------------------------------------------- > Brendan Dooley > General Manager > > Open Access Pty Ltd > PO Box 301 > Crows Nest NSW 1585 > > Phone +612 9978 7009 > Fax +612 9978 7099 > Email [EMAIL PROTECTED] > --------------------------------------------------------------------- > This email is intended only for the use of the individual or entity named > above and may contain information that is confidential and privileged. If > you are not the intended recipient, you are hereby notified that any > dissemination, distribution or copying of this email is strictly prohibited. > If you have received this email in error, please notify us immediately by > return email or telephone +612 9978 7009 and destroy the original message. > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
