hi, i just found a page on the net which might me worth some lines.
for the urgent reader: http://isdn.jolly.de there is a guy in germany who has successfully programmed a gpl-patch for isdn4linux to make isdn cards with the hfc chipset from cologne chip (http://www.colognechip.com) run in the NT mode (up to 2.4.20). this mode is needed to connect isdn device to a pc and enables the use of these cards as an internal S0 interface. the cards that run with that patch are: HFC-S PCI based cards (HiSax card type 35) HFC-S+ based cards (HiSax card type 37) HFC-SP/PCMCIA based cards (HiSax card type 39) HFC-4S / HFC-8S chip sets (driver under development) d-link (http://www.d-link.com) builds cards with these chips (search for DMI-128I+) and they seem to be quite cheap. on the page you will also find some software that offers pbx features and a h.323 gateway, as well as some documentation on how to modify your ntba/nt1 to power the bus. would be cool if someone could test the kit, write to the list if it works and what the chances are to enable * to use the nt feature. greetings morten (mortck) -- Diese Nachricht wurde durch MailScanner (http://www.mailscanner.info) automatisch auf Viren sowie andere gefaehrliche Inhalte untersucht und ist unbedenklich. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
