Hi Cristoph, the B1 has linux capi 2.0 drivers, so you can use chan_capi. Grab it at http://www.junghanns.net/chan_capi.html read INSTALL and README, take a look at the sample configuration file capi.conf.
regards kapejod -- Klaus-Peter Junghanns CEO,CTO Junghanns.NET Internet-Services & Software-Development GmbH Breite Strasse 13 - 12167 Berlin - Germany fon: +49 30 79705392 fax: +49 30 79705391 mobile: +49 160 7503372 email: [EMAIL PROTECTED] Am Mon, 2003-03-03 um 21.56 schrieb Christoph Sch�tz: > Hello, > > first of all I have to say: I read the handbook but there are some questions > left I couldn't answer. It's very basicaly. Sorry about that. > > I have a AVM B1 PCI - Card. I think there is a I4L and a Capi-Port installed. > > 1. How can I define the right channels, how are they defined. I found the > modem.conf example with an ISDN section but how can I make asterisk load it? > > 2. Do I have to compile Zaptel, zapata or libpri ? > > 3. How can I dial, if I have configured anything. Is it only possible by using > the console or is there any frontend? > > If there is somebody out there who solved this and has configuration files, I > would be pleased to get them as an example. > > Thanks for help Christoph > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
