Red Alarm on an X100P means that it does not detect a phone line connected to the device. I would double check your cabling. The loadzone only has to do with the sound of dialtone, etc, and i wouldn't mess with it until you have the basic functionality working.
ok now i when i plug the phoneline into the "phone" socket of the X100P there are no alarms, but when i dial the phone line its connected to i get "number busy" (from my phone) and when i reboot the machine it kernel panics (scroll lock and caps lock flashing). i havent installed anything else, except a default "everything" redhat 7.2 and webmin.
so i decided to unload all the modules[0] before i reboot - and i get this message "rmmod: module wcfxo is not loaded" and then rebooting doesnt cause a kernel panic. after i do this and reboot the machine i get a red alarm on the X100P card again, even thought the line is still connected to the "phone" socket of the card. any ideas? is there any way i can get these modules to autounload before a reboot, the kernel panic problem was the reason i did a machine rebuild in the first place (didnt think through the problem hard enough that time).
duncan
[0] /sbin/rmmod audio /sbin/rmmod wcfxo /sbin/rmmod wcusb /sbin/rmmod zaptel
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
