Hello, I'm totally new to telephony but I'm now in charge of doing some cleaning in our school telephony architecture. I'm used to networking stuff and was very happy to find Asterisk, a free application, into these proprietary hardwares and softwares.
I cannot remove our "old" PBX (a Bosch integral 33) but I wish to add some IP phones (they can use our not so busy data network). The problem is that I'm very confused with telephony terminology. Our Bosch PBX has a free DT2 card (or DT21 card, that seems to be an alias for the same thing). Other DT2 cards are used to connect the PBX to telephony operators (one for incoming calls and another for outgoing calls) and to other PBX on the campus. We have something called "T2" link to the operators (up to 30 channels). I would like to known if these "T2" links are related to the E1 stuff that everybody talk about on this forum. In other words, can I link the free "T2" card of the Bosch to a Linux box with an E100P interface and make it a secondary PBX with Asterisk ? One which will be aware of VoIP ? Any hint will be very much appreciated ... Xavier _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
