Is there a block diagram or similar for the T400P? What about programming information? What documentation exists for it that a device driver writter might want?
I need a T1 interface for a non-telephony application. All I need to do is get the raw bits into a computer The application is this: A radio telemetry system sends a bit stream to a reciever the reciever recovers the clock but not word boundries it then puts this uninterpeted bit stream on one end of a T1. ...(lots of detail omitted here.)... At the other end we use "a bunch of equipment" to get this data into a format usable by computers. I'd like to replace this "bunch of equipment" with a PC, some kind of a T1 interface card and some software. The more basic and programable the T1 interface card the better as the data is unconventional (from the viewpoint of a PC) and might contain 12, 6, or 10 bit bytes mixed in the same bit stream. Sometimes the bit stream is multiplexed over multiple T1s. So I do _not_ need the T1 interface card to do any protocol, just pass the bits. ===== Chris Albertson Home: 310-376-1029 [EMAIL PROTECTED] Cell: 310-990-7550 Office: 310-336-5189 [EMAIL PROTECTED] KG6OMK __________________________________________________ Do you Yahoo!? Yahoo! Tax Center - File online, calculators, forms, and more http://tax.yahoo.com _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
