Re: [Asterisk-Users] chan_h323 problems....

[Jeremy McNamara]

When you get those kinds of errors means you have library version skew happening.  Either you don't have the proper versions of Open H.323/PWlib or they were cvs updated and not make clean'ed before make opt-ing them.

So make absolutely sure you have the versions (or newer) of Open H.323 / PWlib listed in the README and run a make clean opt to each.

Also, make sure you do not have any other older or distro specific installs laying around somewhere.  I've noticed a pretty major problem with that.

If you still have trouble find me (JerJer) in #Asterisk.


Jeremy McNamara


Mark Darvill wrote:

I have had * installed for a couple of weeks now and am very impressed. I have got Zap, SIP and MGCP working and can call freely between them with just things like transfer still to sort out etc.

 

I then though I would add H.323 support to my working system, having read the previous threads on the subject before I installed I installed the pre-reqs

 

pwlib

openh323

gnugk for h.323 gatekeeper functionality

 

All of these seem to have installed correctly.

 

On installing chan_h323 to integrate * into the h.323 stack it makes OK, make installs OK, appears in modules.conf but on firing up * I get the following problem, has anyone seen this before or knows what the fault is ?? Looks like a library problem but I have not seen this type of error before. 

 

[cdr_csv.so] => (Comma Separated Values CDR Backend)
 [chan_h323.so]WARNING[1024]: File loader.c, Line 212 (ast_load_resource): /usr/
lib/asterisk/modules/chan_h323.so: undefined symbol: _ZNK7PThread11GetThreadIdEv
WARNING[1024]: File loader.c, Line 368 (load_modules): Loading module chan_h323.
so failed!

 

Thanks, Mark