Also, are all the fxo channels "connected" to the t1 channels on the channel bank? I believe you have to map them just like on the CAC Adits...
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Martin Pycko Sent: Thursday, June 05, 2003 10:40 AM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Valiant Comms VCL 30 Channel bank + Digium E100P Do you really have the channels in asterisk ? "zap show channels" Is the alarm on the E1 circuit ? Martin On Thu, 5 Jun 2003, Jay Banda wrote: > Hello All. > > Does anyone have experience with the Valiant Comms vcl30 channel > and the Digium E100P in asterisk ? We have the vcl30 channel bank, > loaded with FXO interfaces. We have set up * for fxs in zaptel.conf > and in zapata.conf, but are not able to get any incoming calls. > > The vcl fxs interfaces show that they are ringing ( incoming call from > PSTN ) , but the * does not answer ( or am I missing something , I think > the E100P card is supposed to indicate that there is an incoming call ?) > > If anyone is able to point me in a remotely correct direction, I will be > eternally grateful :) > > Kind regards to all > > Jay Banda > Snr Network Eng > CopperNET Solutions > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
