Remember that capi 2.0 doesn't have echo suppressor routines. Only Eicon Diva server cards have on board DSPs, that can be enabled with Eicon custon CAPI commands. (the great * chan_capi already do that).
Matteo. Il lun, 2003-06-02 alle 12:39, Michiel Betel ha scritto: > My Fritz paasive PCI hasn't crashed so far.... and works fine, relatively > low latency so not too much echo. However for professional use, get an > active CAPI card so you can use the CAPI echo supp. routines. > > Michiel > > Oliver Brandt said: > > > On Mon, Jun 02, 2003 at 12:33:06AM +0200, Piotr Adamiak wrote: > >> Hello, > >> > >> Anyone on this group using / implementing * and hardware certified for > >> use in Europe ? I believe that ISDN4Linux cards mostly have telecomm > >> certificates, so using them should be safe on the client side. Are there > >> any major issues / problems associated with using such cards with * ? > >> I am talking about a small / very small office with single - few lines. > > > > I tried ISDN4Linux but I had the problem that high voices were > > recognized as DTMF signal wich ended up in beping through the whole > > call. I belive there is a patch out (maybe eve imcluded in the regular > > asterisk code) but I have not tried it. I'm using chan_capi and since I > > swiched to an AVM B1 it works great. With the AVM Fritz (passive) it's > > suppose to work but it actually cause my whole system to crash every > > once in a while... > > Just buy a B1 or so at ebay and you should be fine. > > CU > > Oliver > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
