I have a problem on starting the ISDN PRI T1 line using on Wildcard T400P.It keeps saying the D-Channel of the span is down after T200 timeup and sending SADME and receive DM from network side.
How can I start the D-Channel? I have checked with the network side and matched with their framing and coding.
# ztcfg -vvv [EMAIL PROTECTED] log]# ztcfg -vvv
Zaptel Configuration ======================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: Individual Clear channel (Default) (Slaves: 03) Channel 04: Individual Clear channel (Default) (Slaves: 04) Channel 05: Individual Clear channel (Default) (Slaves: 05) Channel 06: Individual Clear channel (Default) (Slaves: 06) Channel 07: Individual Clear channel (Default) (Slaves: 07) Channel 08: Individual Clear channel (Default) (Slaves: 08) Channel 09: Individual Clear channel (Default) (Slaves: 09) Channel 10: Individual Clear channel (Default) (Slaves: 10) Channel 11: Individual Clear channel (Default) (Slaves: 11) Channel 12: Individual Clear channel (Default) (Slaves: 12) Channel 13: Individual Clear channel (Default) (Slaves: 13) Channel 14: Individual Clear channel (Default) (Slaves: 14) Channel 15: Individual Clear channel (Default) (Slaves: 15) Channel 16: Individual Clear channel (Default) (Slaves: 16) Channel 17: Individual Clear channel (Default) (Slaves: 17) Channel 18: Individual Clear channel (Default) (Slaves: 18) Channel 19: Individual Clear channel (Default) (Slaves: 19) Channel 20: Individual Clear channel (Default) (Slaves: 20) Channel 21: Individual Clear channel (Default) (Slaves: 21) Channel 22: Individual Clear channel (Default) (Slaves: 22) Channel 23: Individual Clear channel (Default) (Slaves: 23) Channel 24: HDLC with FCS check (Default) (Slaves: 24)
24 channels configured.
# dmesg
PCI: Found IRQ 10 for device 02:09.0 Detected Tormenta 2 Quad T1/PRI or E1/PRA at 0x40100000/0x40200000 irq 10 fwload: Init and done gone to low fwload: Init went high (clearing done) Now loading... fwload: Transferred 69884 bytes into chip fwload: Loading done! Xilinx Chip successfully loaded, configured and started!! Tormenta 2 Quad T1/PRI Card Detected Card number: 0 tor2: Launching card: 0 Registered Tormenta2 PCI Tor2: Configuring span 1 Tor2: Configured channel 1 (Tor2/0/1/1) sigtype 128 Tor2: Configured channel 2 (Tor2/0/1/2) sigtype 128 Tor2: Configured channel 3 (Tor2/0/1/3) sigtype 128 Tor2: Configured channel 4 (Tor2/0/1/4) sigtype 128 Tor2: Configured channel 5 (Tor2/0/1/5) sigtype 128 Tor2: Configured channel 6 (Tor2/0/1/6) sigtype 128 Tor2: Configured channel 7 (Tor2/0/1/7) sigtype 128 Tor2: Configured channel 8 (Tor2/0/1/8) sigtype 128 Tor2: Configured channel 9 (Tor2/0/1/9) sigtype 128 Tor2: Configured channel 10 (Tor2/0/1/10) sigtype 128 Tor2: Configured channel 11 (Tor2/0/1/11) sigtype 128 Tor2: Configured channel 12 (Tor2/0/1/12) sigtype 128 Tor2: Configured channel 13 (Tor2/0/1/13) sigtype 128 Tor2: Configured channel 14 (Tor2/0/1/14) sigtype 128 Tor2: Configured channel 15 (Tor2/0/1/15) sigtype 128 Tor2: Configured channel 16 (Tor2/0/1/16) sigtype 128 Tor2: Configured channel 17 (Tor2/0/1/17) sigtype 128 Tor2: Configured channel 18 (Tor2/0/1/18) sigtype 128 Tor2: Configured channel 19 (Tor2/0/1/19) sigtype 128 Tor2: Configured channel 20 (Tor2/0/1/20) sigtype 128 Tor2: Configured channel 21 (Tor2/0/1/21) sigtype 128 Tor2: Configured channel 22 (Tor2/0/1/22) sigtype 128 Tor2: Configured channel 23 (Tor2/0/1/23) sigtype 128 Tor2: Configured channel 24 (Tor2/0/1/24) sigtype 896 Registered tone zone 0 (United States / North America) Tor2: Startup span 1 (ESF/B8ZS) LBO: 0 db (CSU)/0-133 feet (DSX-1)
# cat /etc/asterisk/zapata.conf [channels] context=default rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocanel=no echocancelwhenbridged=no relaxdtmf=yes rxgain=0.0 txgain=0.0 immediate=no switchtype=national signalling=pri_cpe group=1 channel=>1-23
[EMAIL PROTECTED] root]# asterisk -r Asterisk 0.4.0, Copyright (C) 1999-2001 Linux Support Services, Inc. Written by Mark Spencer <[EMAIL PROTECTED]> ========================================================================= Connected to Asterisk 0.4.0 currently running on voicetest03 (pid = 925) Sending Set Asynchronous Balanced Mode Extended
> [
> [00
> [00 01
> [00 01 7f
> [00 01 7f ]
> [00 01 7f ]
> Unnumbered frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ]
> 0 bytes of data
voicetest03*CLI>
< [
< [00
< [00 01
< [00 01 1f
< [00 01 1f ]
< [00 01 1f ]
< Unnumbered frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< M3: 0 P/F: 1 M2: 3 11: 3 [ DM (disconnect mode) ]
< 0 bytes of data
-- Got DM Mode from peer.
== D-Channel on span 1 down
Sending Set Asynchronous Balanced Mode Extended
> [
> [00
> [00 01
> [00 01 7f
> [00 01 7f ]
> [00 01 7f ]
> Unnumbered frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ]
> 0 bytes of data
voicetest03*CLI>
< [
< [00
< [00 01
< [00 01 1f
< [00 01 1f ]
< [00 01 1f ]
< Unnumbered frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< M3: 0 P/F: 1 M2: 3 11: 3 [ DM (disconnect mode) ]
< 0 bytes of data
-- Got DM Mode from peer.
== D-Channel on span 1 down
thanks, Lay Chi Man
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
