You can, your only problem will be to have a really nice and clean pci bus on your motherboard so be very very carefull with your selection there.
On Monday 09 Jun 2003 3:12 pm, Dante Alzamora wrote: > Thanks Andrew & John, > > What about the suggestion for the SOHO? > > 1) What is the best cost effective solution for a small office: I need 3 > FXS & 2 FXO. > 2) Can I hookup a TDM400P (3FXS) and 2 X100P (FXO) on the same computer? > > TIA > > -----Original Message----- > From: John Congdon [mailto:[EMAIL PROTECTED] > Sent: Saturday, June 07, 2003 9:07 AM > To: [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED] > Subject: Re: [Asterisk-Users] small office > > > beware, I bought one of these phones and there is no documentation. > I do not think their IP = the IP you want in a phone. > > I still have not found out what it means, but It surely doesn't look like > what we need. > > John > > -----Original Message----- > From: Andrew Gillham [mailto:[EMAIL PROTECTED] > Sent: Friday, June 06, 2003 6:11 PM > To: Dante Alzamora > Subject: Re: [Asterisk-Users] small office > > On Fri, Jun 06, 2003 at 05:09:13PM -0400, Dante Alzamora wrote: > > What is the best cost effective solution for a small office: > > I need 3 FXS & 2 FXO. > > > > Can I hookup a TDM400P and 2 X100P on the same computer? > > > > Also, I saw some IP phones for $25.99 > > http://www.wosmile.com/cgi-bin/view_store_item.cgi?pid=4424&sid=5&category= >1 > > > Can I use them with asterisk? will they be able to do the same as the > > TDM400P? > > Those are not "IP Phones" in the sense of TCP/IP. I believe the term IP > in this case is something like 'initial prefix' or similar. > > I've seen these on eBay, and looked into them. From what (little) I could > find, it appears that you can configure the phone to dial some pre-defined > number when you pick it up, or before dialing the entered numbers. > (like it can do '9' or '10-10-321' or whatever) > > It is simply not an H.323, MGCP, SCCP, SIP or anything IP phone. > > I would say look into the Grandstream phones. http://www.grandstream.com/ > > > I read that to run the conference app Meetme you needed a Zaptel driver. > > You can use the ztdummy driver that uses your USB controller for timing. > > -Andrew > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
