Thanks for the help. I was able to get my application to load with Asterisk, now I just need to get it to work. After reading your comment, I don't know that I fully understand what's going on as far as the channels and extensions. Are you saying that the MWI is tied to the channel? If that is the case, then for my SIP phones, would the channel be (SIP/XXXX)? If it should be, then should extensions.conf look like:
exten => 811NXXXXXX,1,MessageWaitOn(SIP/EXTEN:6) Again, thanks for the help. Jesse Date: Mon, 09 Jun 2003 22:37:01 -0500 From: Steven Critchfield <[EMAIL PROTECTED]> Subject: Re: [Asterisk-Users] Adding an app To: [EMAIL PROTECTED] Organization: Reply-To: [EMAIL PROTECTED] On Mon, 2003-06-09 at 13:01, [EMAIL PROTECTED] wrote: > I am in the process of testing out the Cisco ATA 186 to provide analog > phone service via VoIP for some of our remote users. I have that working > fine and well, but am struggling with another aspect. We already have a > large centralized voicemail system, which I would like to use for these > users. I can get the call to roll to new the centralized voicemail no > problem, but I'd like to provide message waiting for them as well. I've > seen where Asterisk can provide MWI via stutter dial tone for its own > internal voicemail. After looking at the source code, it appears that > there is a flag set that determines whether or not * needs to play stutter > dial tone when the user lifts the handset. I can get my voicemail system > to pass the MWI to Asterisk in this form: > > 810NXXXXXX == turns off MWI > 811NXXXXXX == turns on MWI > > I would like to set up extensions.conf like this: > > exten => 810NXXXXXX,1,MessageWaitOff(EXTEN:6) > exten => 811NXXXXXX,1,MessageWaitOn(EXTEN:6) > > I would like the MessageWaitOff and MessageWaitOn apps to appropriately set > the flag for the extension that is passed to it. This is where my problems > start. I have spent some time looking through the source code, but I > haven't determined what all I need to touch to add an application and have > Asterisk recognize it. I have created the apps, compiled them and created > the shared object file. What other steps do I need to take? Will what I'm > proposing here even work? You need to get your shared object into the asterisk lib directory, and worst case, add a load command to the modules.conf file. Comment as to how you plan on implementing the above function. The exten does not get the MWI, it is a channel. Channels and extensions are different. Extensions can point to many channels, but a channel only points to one phone interface. You will need to make a lookup to go from extension to channel, then you can go toggle the MWI. Otherwise your mailbox is going to have to be your extension, possibly in that long format, and you will have to traverse every channel to find which ones to set MWI. -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
