Martin Pycko escribi�:
It should be good enough. The problem is propably in software configuration ....
Martin
On Wed, 11 Jun 2003, [UTF-8] Carlos Carús wrote:
So if cable is ok, the problem must be one of these three:
1.- Config error, as Martin points (most probably) 2.- System can't hold the load (humm..) 3.- Faulty E400P? (don't want to beleive it)
Let's suppose it's a config mistake...
Server#1 (caller) zaptel.conf: ----------------------------------- span=1,1,0,ccs,hdb3,crc4 span=2,0,0,ccs,hdb3,crc4 span=3,0,0,ccs,hdb3,crc4 span=4,0,0,ccs,hdb3,crc4 # Span 1 bchan=1-15 dchan=16 bchan=17-31 # Span 2 bchan=32-46 dchan=47 bchan=48-62 # Span 3 bchan=63-77 dchan=78 bchan=79-93 # Span 4 bchan=94-108 dchan=109 bchan=110-124 loadzone = fr defaultzone = fr
Server#2 (callee) zaptel.conf: ----------------------------------- span=1,1,0,ccs,hdb3,crc4 span=2,0,0,ccs,hdb3,crc4 span=3,0,0,ccs,hdb3,crc4 span=4,0,0,ccs,hdb3,crc4 # Span 1 bchan=1-15 dchan=16 bchan=17-31 # Span 2 bchan=32-46 dchan=47 bchan=48-62 # Span 3 bchan=63-77 dchan=78 bchan=79-93 # Span 4 bchan=94-108 dchan=109 bchan=110-124 loadzone = fr defaultzone = fr
These are zapata.conf: --------------------- [channels] context=inicio switchtype=euroisdn signalling=pri_cpe (pri_net in server#2) rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=no transfer=no cancallforward=no callreturn=no echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0
group=1 signalling=pri_cpe (pri_net in server#2) channel => 1-15 channel => 17-31 channel => 32-46 channel => 48-62 channel => 63-77 channel => 79-93 channel => 94-108 channel => 110-124
Server#1 (caller) extensions.conf: ----------------------------------- [general] static=yes writeprotect=no [inicio] exten => s,1,PlayBack(laxana) exten => s,2,Goto(s,1) exten => t,1,hangup exten => i,1,hangup exten => o,1,hangup exten => h,1,hangup
Server#2 (callee) extensions.conf --------------------------------- [general] static=yes writeprotect=no [inicio] exten => s,1,Answer exten => s,2,Agi,600agi exten => s,3,hangup exten => t,1,hangup exten => i,1,hangup exten => o,1,hangup exten => h,1,hangup
Do you see something weird???
Thnaks people!!!!! -- Carlos Car�s Ingeniero de Sistemas [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> Alisys Software ------------------------------------------------------------------------ Alisys Software, S.L. Edificio Lexington - C/ Orense, 85 28020 MADRID Tfno.: 985175935 - 915678474 Fax: 915714244 web: http://www.alisys.net <http://www.alisys.net/> wap: http://www.alisys.net/wap/
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
