Hello everybody, We are running into some strange problems on inbound calls from our termination provider.
They are using a VegaStream 100 with H.323 and a couple of codecs available. We are running Asterisk with the H.323 channel and the G.729 codec's from digium (10 pack license so there should be enough for a couple of calls). Outgoing calls work perfectly, both on G.711 ulaw and G.729. The strange thing is that on incomming calls, the incomming audio stream doesn't work. To test this we put up the echo test application onto one of our incomming numbers. After hearing Alison telling me that i was about to do an echo test i could shout anyway i like but i got nothing back. When using the ulaw codec, i could hear my echo back.... I even disabled firewalling on the box to rule out the possibility of the stream getting blocked by that, but that didn't seem to make any difference. As the outgoing calls are just fine on G.729 and going to the same VegaStream 100 I have no idea what this problem could be. Our provider did some test them selves from the vega to another Vega, to some cisco hardware and to some IP phones directly and couldn't come to any other conclusion then that it must have been a problem with asterisk. Anybody else using * with a VegaStream on the other side? Anyone that has any idea on what this could be or where to look further? Any help is really appreciated as doing G.711 over the internet is not really doing the audio any good :( Kind regards, Tjardick van der Kraan _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
