I've done this, with the exact versions you state, 3 times today - every one does the full , proper thing. I did:
cd pwlib;make clean;make opt;make install cd ../openh323;make clean;make opt;make install cd ../asterisk/asterisk/channels/h323;make clean;make install;make samples works every time on a clean RedHat 7.2 100% install I hope something in there helps... ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, June 16, 2003 8:20 PM Subject: RE: [Asterisk-Users] chan_h323 problems > I did RTFM. It looks like the instructions conflict each other. Here's what > it says: > > 4. Build the debug and release versions of the PWLib library as follows: > cd $PWLIBDIR > make both > > Your README under channels/h323/README says: > cd /path/to/pwlib > make clean opt > > Which one do I follow? If I do a 'make opt' it won't build the libs in > pwlib. I tried it twice, 'make opt' won't build it but 'make both' will. > > I'm using PWLib 1.4.11 and Openh323 1.11.7. If I've misread something, > please let me know. > > Asterisk now loads without core dumping (chan_oh323 was installed, it's been > removed now). Although, the outgoing quality of the call is very choppy. > Incoming works fine, no problems. Any idea what would cause outgoing calls > to have problems? > > I'm sending these calls to GnuGK which then sends the calls to a Quintum or > Cisco H323 Gateway (both are having the same problem). > > Regards, > Michael > > > > >> > >> > > > >No.. you MUST do a make opt. > > > >RTFM http://www.openh323.org/build.html > > > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users