Hello, I've commited the new busydetect routine to CVS. You need to cvs update asterisk of course and then choose it in asterisk/Makefile and recompile asterisk. All you X100P users that had the problems with false hangups or the card not being able to detect the busy tone please check that.
In the asterisk/Makefile you need to find a line BUSYDETECT = and uncomment what you want/ comment out what you don't want. Also in /etc/asterisk/zapata.conf you need to have busydetect=yes busycount=<number> where <number> should be betwen 5 and 15. The best value to try is busycount=10 Also if you have some strange signal like 3 beeps (200 ms tone, 200 ms silence) and then silence of e.g. 500 ms then you need to comment out: BUSYDETECT+= #-DBUSYDETECT_TONEONLY But then you can't use it with BUSYDETECT+= #-DBUSYDETECT_COMPARE_TONE_AND_SILENCE The last 'flag' should enforce detection (less false hangups) although I tested the algorithm without -DBUSYDETECT_TONEONLY nor -DBUSYDETECT_COMPARE_TONE_AND_SILENCE with busycount = 10 and after 1 hour of conversation I didn't have any false hangups. regards Martin _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
