Many thanks, Martin .. worked fine with dtmfmode=info Dave
----- Original Message ----- From: "Martin Pycko" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, June 23, 2003 4:32 PM Subject: Re: [Asterisk-Users] Asterisk CPU power requirements > You need to find out which way your SIP gateway wants to receive the > DTMFs. There are three ways to do that. Read sip.conf.sample. > > Martin > > On Mon, 23 Jun 2003, Dave Alan Caruana wrote: > > > hi there, > > I have an installed & working Asterisk server, > > which I am using to connect to a SIP service > > abroad. Although I can hear the IVR from the > > ITSP, I cannot seem to send them digits from > > my phone. > > > > I have also noticed that the CPU usage on my > > machine is up to 100% constantly and 99.9% > > of that is going to Asterisk, even when asterisk > > is just idle and doing nothing at all .. > > > > The machine is a Celeron 800 with 256Mb of RAM, > > and there is a Digium single span E1 card > > going into it. > > > > Is something wrong? or do I just need more > > CPU power? > > > > cheers > > Dave > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
