Hi, chan_zap.c is a big file. I would be nice to have something like in Cisco ATA186. http://www.cisco.com/univercd/cc/td/doc/product/voice/ata/ataadmn/ata8mgcp/mgcpaape.htm#1023728
In that way you can use it allmost everywhere in the world, just by changing a parameter. Thanks, Dan ----- Original Message ----- From: "Gary" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, June 26, 2003 4:05 AM Subject: Re: [Asterisk-Users] X100P and PSTN caller id > Have you got the number of rings for caller-id set right ?? > > its in chan_zap somewhere from memory.. > > Actually it would be nice if it was actually in zaptel.conf instead.. > > Mark ? > > On Wed, 25 Jun 2003 22:37:36 +0300, Dan wrote: > > >Hi all, > > > >I have an X100P card which works fine with Asterisk, but I have some > >problems with the caller id. > >When someone calls me from the PSTN, I see as a callerid my own PSTN number. > >There is a specific setting for this type of CallerID in order to be used > >with X100P? > > > >Thank you, > >Dan > > > > > >_______________________________________________ > >Asterisk-Users mailing list > >[EMAIL PROTECTED] > >http://lists.digium.com/mailman/listinfo/asterisk-users > > . > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
