Granted I haven't read the handbook in a while, but I think this might be a unique question worth answering.
The idea should be that you create each user as a group. And then you dial with Zap to each of the 4 groups. Asterisk will call out using the lowest port in each of the groups. This accomplishes what you mentioned. for the zapata interface use something like group = 1 ; 4 line phone 1 channel => 1-4 group = 2 ; 4 line phone 2 channel => 5-8 group = 3 ; 4 line phone 3 channel => 9-12 group = 4 ; last 4 line phone channel => 13-16 and your dial string will be like exten => _X.,1,Dial(Zap/g1&Zap/g2&Zap/g3&Zap/g4) On Thu, 2003-06-26 at 16:08, Jeremy McNamara wrote: > See zapata.conf.sample group keyword and the Asterisk Handbook, this is > covered there. > > > > Jeremy McNamara > > > Joe Antkowiak wrote: > > >I was wondering if someone could point me in the right direction with > >this... > > > >I have 3 4-line phones, all connected to a * box via a T100P and channel > >bank. > > > >I essentially want to create a "hunt group" for each phone, and then as > >calls come in, Dial to include the 3 different hunt groups, so that if one > >user is on line 1 of their phone, a new incoming call will go to line 2 of > >their phone, but line 1 of the others. > > > >Can I do this with hints? > > > >Thanks. > > > >-Joe > > > >_______________________________________________ > >Asterisk-Users mailing list > >[EMAIL PROTECTED] > >http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
