Re: [Asterisk-Users] Cisco ATA-186 config guide for Asterisk

[denon]

John's guide goes into a lot more detail, which is nice .. one thing that 
caught my eye, was the audio mode of   0x00140014 instead of  0x11241124 
(as other Asterisk FAQs have suggested).  Is there an advantage to your 
audio mode? Always lookin for better quality ..

Thanks,
-d
At 07:17 PM 6/29/2003 -0400, you wrote:
You could have just went here:   http://www.djernes.org/~shawn/ata186.htm



Jeremy McNamara



John Todd wrote:

I really should be doing something better on this beautiful weekend, but 
I'm trying to save myself some time for later projects by documenting 
some things that have been particularly troublesome in the past.  That 
being said...

I've written up a configuration guide for the Cisco ATA-186, which 
describes some of the features that are possible to set in the ATA and 
specifically what needs to be done to get it working with Asterisk.

It's not pretty, it's not HTML, but it's a lot of hints that I've 
collected from the list and other sources over the last year or so:

http://www.loligo.com/asterisk/Cisco/ATA-186-guide.v20030628.txt

JT
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users