>From Archives courtesy of Don: Email Dated: Fri, 4 Apr 2003 17:51:29 -0600
Normal RJ48 jack (some call it an RJ45 which is the same physically) out of equipment on pins 1 & 2 (Tip & Ring) into equipment on pins 4 & 5. (Tip & Ring) Normally tip is the lower number so I would *guess* that you need. pin 1 --> pin 22 pin 2 --> pin 47 pin 4 <-- pin 23 pin 5 <-- pin 48 Don Pobanz At 23:39 30/06/2003 +0200, you wrote: >What is the pin layout of the E1 sockets on the E400Ps? What pins are for >the TX and RX pair? > >Regards >Fredrik >_______________________________________________ >Asterisk-Users mailing list >[EMAIL PROTECTED] >http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
