You can force IRQs in your BIOS config, I would set each card to its own IRQ that doesn't get shared with anything else. Disable your serial and parallel ports if you aren't using them and use 3,4,5,7
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Derek Beaumont Sent: Monday, July 07, 2003 4:15 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] PCI Master Abort I am always getting multiple PCI Master Abort messages when I try to plug in a second TDM400P. I have asked this question before, but I nothing really solved my problem and I just put it on the back burner for a while. I am at a point where this is a crucial issue. I have read that the Zaptel devices share an IRQ, is this causing the problem? Is there a way that I can manually change the IRQs of the devices? By the way, my hardware situation is as follows: 2 X100P 2 TDM400P Any help is always appreciated. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
