Hi,
I am having some trouble getting a TDM400P working, and would be very appriciative of some ideas.
I have installed a TDM400P, and downloaded the appropriate files from CVS, compiled, installed and modprobe'd the devices.
From dmesg:
Module 0: Initialized Module 1: Initialized Module 2: Initialized Module 3: Not installed Found a Wildcard FXS: Wildcard S400P Prototype (4 modules)
So, it has found the card OK, but I am little confused as to what I need to put in zapata.conf to make these 3 ports work with the analog phones I have plugged into these ports.
I have tried looking at the docs on the digium site, but cannot seem to get it worked out.
I tried putting the following in zapata.conf channel => 1 signalling => fxo_ks
And this in extensions.conf exten => 200,1,Dial(Zap/1)
When I start asterisk, I get the following:
[chan_zap.so] => (Zapata Telephony)
WARNING[16384]: File chan_zap.c, Line 6654 (load_module): Ignoring switchtype
WARNING[16384]: File chan_zap.c, Line 6654 (load_module): Ignoring rxwink
WARNING[16384]: File chan_zap.c, Line 576 (zt_open): Unable to specify channel 1: No such device or address
ERROR[16384]: File chan_zap.c, Line 4746 (mkintf): Unable to open channel 1: No such device or address
here = 0, tmp->channel = 0, channel = 1
ERROR[16384]: File chan_zap.c, Line 6404 (load_module): Unable to register channel '1'
WARNING[16384]: File loader.c, Line 299 (ast_load_resource): chan_zap.so: load_module failed, returning -1
WARNING[16384]: File loader.c, Line 394 (load_modules): Loading module chan_zap.so failed!
Thanks for your help Jay _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
