Hey Jay, On Tue, Jul 15, 2003 at 18:41:12 +1000, Jay Tyndall wrote:
> Hi, > > When I use the analog phone connected to Zap/1 how do I transfer & hold the > caller ? > > When I hit the flash key, all that happens is the caller hears a beep > (sounds like DTMF). > But no stutter dial tone on the Zap/1 Port, just continuing conversation > with the caller. > > What could be wrong here? I had the same problem with the standard flash and pulse-timings in Zaptel. Some phone-systems use a flash with a length of about 150ms, which is way too short for the standard Zaptel-config, which assumes your flash is at least 750ms long, and sees the short flashes as a pulse dialled "1" (which is what gets sent in DTMF to your caller). The following changes to the Zaptel-sources fixed it for me: Index: zaptel.h =================================================================== RCS file: /usr/cvsroot/zaptel/zaptel.h,v retrieving revision 1.11 diff -r1.11 zaptel.h 775c775 < #define ZT_DEFAULT_FLASHTIME 750 /* 750 ms default flash time */ --- > #define ZT_DEFAULT_FLASHTIME 150 /* 150 ms default flash time */ 789c789 < #define ZT_MAXPULSETIME (150 * 8) /* 150 ms maximum */ --- > #define ZT_MAXPULSETIME (80 * 8) /* 80 ms maximum */ If possible, you could ofcourse also program your phone to generate the longer flashes and leave Zaptel at it's defaults. Good luck! Grtz, Oliver _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users