RE: [Asterisk-Users] Cisco 7960

[Low, Adam]

Title: Message

William,   I am running 7960/7940's with 5.1 (Asterisk SIP) without problems although I did have some issues (too numerous to mention) with new phones that had never been operated on a CallManager network first. It seems the firmware must be upgraded to support SIP and this can only be done with CallManager (apparently).   The only way I managed to figure everything out was with a packet analyser, I don't suppose you have the possibility of doing that ?   Rgds, Adam -----Original Message----- From: William Carlson [mailto:[EMAIL PROTECTED] Sent: 17 July 2003 13:40 To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Cisco 7960 lol well I probaly should ask a question lol. Any idea what could be causing this? Also I cannot call from my pingtel phone to the 7960 but I can call the other way around. any ideas on that?   Thanks,      Will   ----- Original Message ----- From: William Carlson To: [EMAIL PROTECTED] Sent: Thursday, July 17, 2003 7:34 AM Subject: [Asterisk-Users] Cisco 7960 I bought a 7960 it was running version 3.3 of the SIP software.  It worked fine. Me being the idiot I am upgraded to 5.1. Now it downloads the configs and then reboots. if I unplug the ethernet it doesn't reboot or if I remove all the lines in the SIP config it won't reboot. Since this is used cisco won't give me any support. For now I am running the MGCP version but eh asterisk seems to have some issues with it.    Thanks,      Will ********* DISCLAIMER ********* This message and any attachment are confidential and may be privileged or otherwise protected from disclosure and may include proprietary information. If you are not the intended recipient, please telephone or email the sender and delete this message and any attachment from your system. If you are not the intended recipient you must not copy this message or attachment or disclose the contents to any other person