I am trying to put a call on a E1 ISDN : The configuration are simple: zapata.conf : [channels] context=inbound switchtype=euroisdn signalling=pri_cpe usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes ;echocancel=no echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 ;immediate=yes immediate=no callerid => asreceived amaflags => billing usecallerid=yes overlapdial=yes ; Span 1 group=1 context=inbound signalling=pri_cpe channel => 1-15 channel => 17-31
; Span 2 group=2 context=inbound signalling=pri_cpe channel => 32-46 channel => 48-62
; Span 3 group=3 ;context=h323 context=outbound signalling=pri_cpe channel => 63-77 ;channel => 79-93 ;group=5 ;context=h323 ;signalling=pri_cpe channel => 79-93
; Span 4 group=4 context=outbound signalling=pri_cpe channel => 94-108 channel => 110-124
extension.conf exten => 9999,1,Wait(1) exten => 9999,2,Answer exten => 9999,3,Playback(beep) exten => 9999,4,Dial(Zap/g3/0007352638)
and I get this error
You can see the output from pri debug span3:
*CLI> pri debug span 3
Enabled debugging on span 3
< Protocol Discriminator: Q.931 (8) len=41
< Call Ref: len= 2 (reference 10309/0x2845) (Originator)
< Message type: SETUP (5)
< Sending Complete (len= 4)
< Bearer Capability (len= 3) [ Ext: 1 Q.931 Std: 0 Info transfer capability: 3.1kHz audio (16)
< Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
< Ext: 1 User information layer 1: A-Law (35)
< Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Preferred Dchan: 0
< ChanSel: Reserved
< Ext: 1 Coding: 0 Number Specified Channel Type: 3
< Ext: 1 Channel: 13 ]
< Progress Indicator (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the remote user (4)
< Ext: 1 Progress Description: Calling equipment is non-ISDN. (3) ]
< Calling Number (len=14) [ Ext: 0 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0)
< Presentation: Unknown (3) '0212318657' ]
< Called Number (len= 7) [ Ext: 1 TON: Unknown Number Type (0) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '9999' ]
-- Making new call for cr 10309
-- Processing Q.931 Call Setup
-- Processing IE 33 (Sending Complete)
-- Processing IE 4 (Bearer Capability)
-- Processing IE 24 (Channel Identification)
-- Processing IE 30 (Progress Indicator)
-- Processing IE 108 (Calling Party Number)
-- Processing IE 112 (Called Party Number)
-- Accepting call from '0212318657' to '9999' on channel 13, span 3
> Protocol Discriminator: Q.931 (8) len=14
> Call Ref: len= 2 (reference 43077/0xA845) (Terminator)
> Message type: SETUP ACKNOWLEDGE (13)
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 13 ]
> Progress Indicator (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
> Ext: 1 Progress Description: Called equipment is non-ISDN. (2) ]
-- Executing Wait("Zap/75-1", "1") in new stack
-- Executing Answer("Zap/75-1", "") in new stack
> Protocol Discriminator: Q.931 (8) len=14
> Call Ref: len= 2 (reference 43077/0xA845) (Terminator)
> Message type: CONNECT (7)
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 13 ]
> Progress Indicator (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
> Ext: 1 Progress Description: Called equipment is non-ISDN. (2) ]
-- Executing Playback("Zap/75-1", "beep") in new stack
-- Playing 'beep'
< Protocol Discriminator: Q.931 (8) len=5
< Call Ref: len= 2 (reference 10309/0x2845) (Originator)
< Message type: CONNECT ACKNOWLEDGE (15)
-- Executing Dial("Zap/75-1", "Zap/g3/0007894638") in new stack
Making new call for cr 32771
> Protocol Discriminator: Q.931 (8) len=45
> Call Ref: len= 2 (reference 3/0x3) (Originator)
> Message type: SETUP (5)
> Bearer Capability (len= 3) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0)
> Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
> Ext: 1 User information layer 1: A-Law (35)
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 1 ]
> Display (len= 1) [ 1 ]
> Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> Presentation: Unknown (1) '0212318657' ]
> Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '0007894638' ]
-- Called g3/0007894638
< Protocol Discriminator: Q.931 (8) len=10
< Call Ref: len= 2 (reference 32771/0x8003) (Terminator)
< Message type: CALL PROCEEDING (2)
< Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
< ChanSel: Reserved
< Ext: 1 Coding: 0 Number Specified Channel Type: 3
< Ext: 1 Channel: 1 ]
-- Processing IE 24 (Channel Identification)
< Protocol Discriminator: Q.931 (8) len=9
< Call Ref: len= 2 (reference 32771/0x8003) (Terminator)
< Message type: DISCONNECT (69)
< Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
< Ext: 1 Cause: Invalid number format (28), class = Normal Event (1) ]
-- Processing IE 8 (Cause)
-- Channel 1, span 3 got hangup
WARNING[28697]: File app_dial.c, Line 304 (wait_for_answer): Unable to forward voice
== No one is available to answer at this time
> Protocol Discriminator: Q.931 (8) len=5
> Call Ref: len= 2 (reference 3/0x3) (Originator)
> Message type: RELEASE (77)
-- Hungup 'Zap/63-1'
< Protocol Discriminator: Q.931 (8) len=5
< Call Ref: len= 2 (reference 32771/0x8003) (Terminator)
< Message type: RELEASE COMPLETE (90)
-- Timeout on Zap/75-1
-- Executing Hangup("Zap/75-1", "") in new stack
== Spawn extension (outbound, t, 1) exited non-zero on 'Zap/75-1'
WARNING[28697]: File cdr.c, Line 434 (ast_cdr_post): CDR on channel 'Zap/75-1' : Not in the system
> Protocol Discriminator: Q.931 (8) len=9 (mysql_log): Zonebill :'000'
> Call Ref: len= 2 (reference 43077/0xA845) (Terminator)
> Message type: DISCONNECT (69)
> Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
> Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ]
-- Hungup 'Zap/75-1'
< Protocol Discriminator: Q.931 (8) len=5
< Call Ref: len= 2 (reference 10309/0x2845) (Originator)
< Message type: RELEASE (77)
> Protocol Discriminator: Q.931 (8) len=5
> Call Ref: len= 2 (reference 43077/0xA845) (Terminator)
> Message type: RELEASE COMPLETE (90)
< Protocol Discriminator: Q.931 (8) len=5
< Call Ref: len= 2 (reference 11078/0x2B46) (Originator)
< Message type: STATUS ENQUIRY (117)
-- Making new call for cr 11078
> Protocol Discriminator: Q.931 (8) len=12
> Call Ref: len= 2 (reference 43846/0xAB46) (Terminator)
> Message type: STATUS (125)
> Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
> Ext: 1 Cause: Response to STATus ENQuiry (30), class = Normal Event (1) ]
> Call State (len= 1) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call state: Null (0)
WARNING[28697]: File app_dial.c, Line 304 (wait_for_answer): Unable to forward voice
Any ideeas why I got this error?
P.S. Many thanks to Martin Pycko ! I will bother his again if no one can help me! :>
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
