ah, ok. thankie. so I can conclude that the budgetones are right, and asterisk is wrong in detecting * and # via sip.conf. The budgetone sends 10 or 11 correctly, but asterisk read only the first '1', resulting in detecting 1 when * or # is pressed... that could happens also with A-D or flash info, I think...
I'll dig into the code... Matteo. Il mer, 2003-07-23 alle 17:13, James H. Cloos Jr. ha scritto: > >>>>> "Matteo" == Matteo Brancaleoni <[EMAIL PROTECTED]> writes: > > Matteo> I was wondering what are the values for sending dmtf via sip > Matteo> info. I mean, when I use dtmf relay via sip info, the sip/sdp > Matteo> message contains a Signal=X where X is the dmtf. That's ok > Matteo> for dtmf 0-9 . but what when dtmf is * or # ? we must send > Matteo> signal=# ? > > Those are defined in rfc2833. (cf http://www.ietf.org/rfc/rfc2833.txt ). > > They start out with: > > Event encoding (decimal) > _________________________ > 0--9 0--9 > * 10 > # 11 > A--D 12--15 > Flash 16 > > and go on from there for other events. > > I don't beleive * currently support any more than the above. > > -JimC > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users -- Brancaleoni Matteo <[EMAIL PROTECTED]> Espia - Emmegi Srl _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
