I am having some problems with g729 with SIP
and ZAP channels.
1)
I have two g729 licences. Very frequetnly (I donīt
know what triggers the error) I get the following warnings and
error when I try to place a call via SIP to my X100P. The only way to get
out of this is through a restart of *. When the error ocurrs there are no other
calls in place. Any ideas?
Error Opening channel:2 not available, see
va_g729_init_global(..) WARNING[71694]:File codec_g729b.c line 102
(g729lin_new): No available g729b resource for channel 2
WARNING:[71694] File translate.c Line 111
(ast_translator_build_path):Failed to build translator path from 8 to 6 Zap1-1
answered SIP/105-ce3c
WARNING[71694]: File chan_zap.c Line 3367
(zt_write):Cannot handle frames in 256 format
Hangup Zap/1-1
2)
have discovered a problem when using g729
under the following setup:
SIP call between a Budgetone 102 and ATA 186
(configured without silence suppresion). Both ends have a ADSL 64kbps. Both ends
are behind Linksys routers. The pings between them are aprox. 100ms. No other
local users on each end. * is being hosted on a PIII,128MB. No other calls
are being handled at the time of the test.
Basically, after a few minutes, with
g729, both ends consistently start getting delays up to a point where
it becomes almost unbearable to speak. If we switch to g723 the
problem goes away.
ANy ideas whatīs going on?
|
- Re: [Asterisk-Users] Problems with g729 Dan Fernandez
- Re: [Asterisk-Users] Problems with g729 Martin Pycko
- Re: [Asterisk-Users] Problems with g729 Dan Fernandez