That is something with asterisk becouse rolling back to version from 06/23/03 using the new libpri and zaptel fixes the problem.
Here is an exept from the config:
[macro-stdexten];
;
; Standard extension macro:
; ${ARG1} - Extension (we could have used ${MACRO_EXTEN} here as well
; ${ARG2} - Device(s) to ring
;
exten => s,1,Dial(${ARG2},20,t) ; Ring the interface, 20 seconds maximum
exten => s,2,Voicemail2(u${ARG1}) ; If unavailable, send to voicemail w/ u
navail announce
exten => s,3,Goto(default,s,1) ; If they press #, return to start
exten => s,102,Voicemail2(b${ARG1}) ; If busy, send to voicemail w/ busy ann
ounce
exten => s,103,Goto(default,s,1) ; If they press #, return to start
exten => 100,1,Macro(stdexten,100,SIP/100) exten => 200,1,Macro(stdexten,200,SIP/200)
with the new CVS I see this in the logfiles: *CLI> pri debug span 1 Enabled debugging on span 1 < Protocol Discriminator: Q.931 (8) len=43 < Call Ref: len= 2 (reference 139/0x8B) (Originator) < Message type: SETUP (5) < Sending Complete (len= 4) < Bearer Capability (len= 3) [ Ext: 1 Q.931 Std: 0 Info transfer capability: 3.1kHz audio (16) < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) < Ext: 1 User information layer 1: A-Law (35) < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Preferred Dchan: 0 < ChanSel: Reserved < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 2 ] < Progress Indicator (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the remote user (4) < Ext: 1 Progress Description: Calling equipment is non-ISDN. (3) ] < Calling Number (len=13) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephon y Numbering Plan (E.164/E.163) (1) < Presentation: Unknown (3) '442358235' ] < Called Number (len=10) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '2382031' ] -- Making new call for cr 139 -- Processing Q.931 Call Setup -- Processing IE 33 (Sending Complete) -- Processing IE 4 (Bearer Capability) -- Processing IE 24 (Channel Identification) -- Processing IE 30 (Progress Indicator) -- Processing IE 108 (Calling Party Number) -- Processing IE 112 (Called Party Number) -- Going to extension s|1 because of immediate=yes or Complete received -- Extension 's' in context 'default' from '442358235' does not exist. Rejecting call on channel 2, span 1
Protocol Discriminator: Q.931 (8) len=9 Call Ref: len= 2 (reference 32907/0x808B) (Terminator) Message type: RELEASE COMPLETE (90) Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
while the CVS from 06/23/03 works fine ( even with the updated libpri and zaptel)
here is what I see with it running:
-----------------------------
< Protocol Discriminator: Q.931 (8) len=43
< Call Ref: len= 2 (reference 140/0x8C) (Originator)
< Message type: SETUP (5)
< Sending Complete (len= 4)
< Bearer Capability (len= 3) [ Ext: 1 Q.931 Std: 0 Info transfer capability: 3.1kHz
audio (16)
< Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
< Ext: 1 User information layer 1: A-Law (35)
< Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Preferred Dchan: 0
< ChanSel: Reserved
< Ext: 1 Coding: 0 Number Specified Channel Type: 3
< Ext: 1 Channel: 1 ]
< Progress Indicator (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
Location: Public network serving the remote user (4)
< Ext: 1 Progress Description: Calling equipment is
non-ISDN. (3) ]
< Calling Number (len=13) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony
Numbering Plan (E.164/E.163) (1)
< Presentation: Unknown (3) '442358235' ]
< Called Number (len=10) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telepho
ny Numbering Plan (E.164/E.163) (1) '2382031' ]
-- Making new call for cr 140
-- Processing Q.931 Call Setup
-- Processing IE 33 (Sending Complete)
-- Processing IE 4 (Bearer Capability)
-- Processing IE 24 (Channel Identification)
-- Processing IE 30 (Progress Indicator)
-- Processing IE 108 (Calling Party Number)
-- Processing IE 112 (Called Party Number)
-- Executing Dial("Zap/1-1", "SIP/100|20|t") in new stack
-- Called 100
-- Accepting call from '442358235' to '2382031' on channel 1, span 1
Protocol Discriminator: Q.931 (8) len=10
Call Ref: len= 2 (reference 32908/0x808C) (Terminator)
Message type: CALL PROCEEDING (2)
Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
ChanSel: Reserved
Ext: 1 Coding: 0 Number Specified Channel Type: 3
Ext: 1 Channel: 1 ]
Protocol Discriminator: Q.931 (8) len=14
Call Ref: len= 2 (reference 32908/0x808C) (Terminator)
Message type: ALERTING (1)
Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
ChanSel: Reserved
Ext: 1 Coding: 0 Number Specified Channel Type: 3
Ext: 1 Channel: 1 ]
Progress Indicator (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
Location: Private network serving the local user (1)
Ext: 1 Progress Description: Inband information or
appropriate pattern now available. (8) ]
-- SIP/100-43a0 is ringing -- SIP/100-43a0 is ringing -- SIP/100-43a0 is ringing < Protocol Discriminator: Q.931 (8) len=9 < Call Ref: len= 2 (reference 140/0x8C) (Originator) < Message type: DISCONNECT (69) < Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the remote user (4) < Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] -- Processing IE 8 (Cause) -- Channel 1, span 1 got hangup == Spawn extension (default, 2382031, 1) exited non-zero on 'Zap/1-1'
Protocol Discriminator: Q.931 (8) len=5 Call Ref: len= 2 (reference 32908/0x808C) (Terminator) Message type: RELEASE (77)
-- Hungup 'Zap/1-1' < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference 140/0x8C) (Originator) < Message type: RELEASE COMPLETE (90)
Ext: 1 Cause: Unallocated (unassigned) num
exten => 2382031,1,Dial(SIP/100,20,t)
--
Anton Yurchenko<[EMAIL PROTECTED]> Digital Generation
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
