Try setting dtmf-relay h245-alphanumeric in the MC3810 dial-peer. On Wed, 30 Jul 2003, Brian West wrote:
> I have done that but I think its the Asterisk => MC3810 via h323 thats > causing that. Does anyone have an example on how i can dump sip to and > from the MC3810 to my asterisk server? > > bkw > > On Wed, 30 Jul 2003, Patrick wrote: > > > > > I have the same setup, and in the sip.conf file I set the dtmfmode=inband > > for each endpoint defined and my Cisco ATA-186s and 7960 phones all work. > > > > > > On Wed, 30 Jul 2003, Brian West wrote: > > > > > I have this setup: > > > > > > Sip Phones -> Asterisk -> h323 gateway -> ptsn > > > > > > Sip phones are setup for out of band dtmf > > > > > > but the h323 gateway is inband. Is their a way to pass the digits from > > > the sip phones to the ptsn via the h323 gateway? > > > > > > bkw > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users