I've searched the archives a bit and have not really come up with a good answer to my queries.
I have * running on a RH9 box behind a LinkSys NAT box. I can talk with iConnectHere outbound just fine. I am trying to configure an inbound Xten softphone from outside. I have that user set as NAT in sip.conf (seems to help), but I still cannot establish a full session. I think the problem comes when * sends info about the RTP connection, it passes the nonroutable address. Is there a ways to tell it to use the firewall IP address for users coming in through that address(and the firewalls nonroutable address).
On the flip side, I have run out of port forwarding slots on my LinkSys, so I am trying to resurrect my old startup's SonicWall PRO. They indicate they support SIP, but they do not elaborate upon that at all. Anyone have comments concerning the SW & SIP?
So far I have an ATA-186, a DG104S, as well as a TDM400P and X100P with service from iConnectHere. I hope to ship either the ATA-186 or DG104S to Australia when I figure out how to deal with them remotely.
Thanks,
-- John
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
