Hello Martin, Yes, I have span configure in zaptel.conf: span=1,0,0,esf,b8zs
I dont have a PRI plugged in to the card. Would it be an issue? Reason is I am current only testing the call originating from H323 endpoints. Firewall shouldn't be a issue since the call works fine with ztdummy loaded. I debug the chan_h323 and it uses the right codec G729 from digium. Only cant hear the Meetme prompt. Foong ----- Original Message ----- From: "Martin Pycko" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, August 13, 2003 12:28 PM Subject: Re: [Asterisk-Users] Conference + E100P + H323 > On Wed, 13 Aug 2003, Chee Foong wrote: > > > Hello, > > > > I have a E100P card from digium and I try to implement a conference > > bridge in asterisk. > > > > I wonder since I got the E100P card do I still need to load ztdummy > > for caller from h323 endpoints to work with Meetme? > It's not necessary. > > > > > I load the E100P driver but i did not load the ztdummy driver. My h323 > Do you have the span configured in /etc/zaptel.conf ? > > > caller does not hear any voice play by Meetme. Looks like ztdummy is > > required as long as h323 is concern and not depend on whether there is > > a zaptel device. > Check the firewall and codecs. > > regards > Martin > > > > > Foong > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
