Hi, Have someone tried to use the same trick with the PCPhone application (soft SIP phone) from iConectHere which can fully support Actiontec's Iinternet Phone Wizard USB phone interface? I have tried without any success.
Thanks, Dan ----- Original Message ----- From: "Martin Pycko" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, August 06, 2003 11:26 PM Subject: Re: [Asterisk-Users] Vonage ATA 186 Factory Default & use with Asterisk ? > One could imagine that you could just use the ATA Vonage box creating some > fake routes to your system ... so that if the box tries to contact > gateway.com you could point that to asterisk and make it work using the > current vonage setup. I would also recommend adding a rule to firewall > that your ATA box cannot contact outside world .... only the asterisk > server. > > regards > Martin > > On Wed, 6 Aug 2003, Steve Haehnichen wrote: > > > -=> On Wed, 06 Aug 2003 14:39:53 -0500, John Schmerold <[EMAIL PROTECTED]> said: > > > > > I've canceled my Vonage service because of the requirement to prefix > > > every call with a 1. > > > > (I was more bothered by the lack of CallerID Name, but the 11-digit > > dialing was indeed annoying for local calls.) > > > > The Vonage ATA-186 units shipped from Vonage before July arrived > > 'unlocked' either with no password, or a firmware version old enough > > to always allow #FACTRESET. As far as I know, the ones from > > Amazon.com arrived locked because no contract was yet in place. > > > > Sometime around mid-July, Vonage pushed out v3.16 and password-locked > > *all* the ATAs. > > > > If your box has been off-line since June, you should still be able to > > reset it with the process you described. If it has recently been > > connected, then it is not going to work. > > > > You can find out by attempting the reset. If it says "PASSWD", then > > it won't let you change any config, reset the box, or upload new > > firmware without the password. If instead it asks you to confirm with > > "*", then you're golden -- you can reset it and then connect to > > http://<ip>/dev to reconfigure. > > > > Vonage used to always charge the cancellation and leave you with the > > box. The option to return the box is new, and should address some of > > the 'green' concerns. > > > > If anyone has a method for 'unlocking' password-locked unsubscribed > > Vonage ATA's, there are a lot of interested folks out there, myself > > included. > > > > -Steve > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
