Hi Martin, Together with another list member we try to find a solution now. We'll keep you in touch if something will be solved.
Thanks, Dan ----- Original Message ----- From: "Martin Pycko" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, August 06, 2003 5:54 PM Subject: Re: [Asterisk-Users] X100P and Caller ID (again and again...) > asterisk/callerid.c > > On Wed, 6 Aug 2003, Dan wrote: > > > Hi, > > > > I have the X100P card and the CallerID service activated on my PSTN line. > > When I receive a call, the CallerID presented through X100P card represent > > my own PSTN number. > > I have the following lines in zapata.conf. > > > > usecallerid=yes > > callerid=asreceived > > > > It seems that it can pick-up the caller id, but not the right part of it. > > My own PSTN number is included in the CallerID information too. > > > > Where I can modify the part of the received information which is considered > > as the CallerID (number) from all the received data? > > > > Thanks, > > Dan > > P.S. I am located in Romania and the PSTN is Siemens based. > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
