Why not get IP phones and use Asterisk as the PBX from the start?? Will probably save you a LOT of money and many headaches...
> Hi, > > I'm planning to buy a new ISDN-PBX (I hope this is the right term for an > ISDN phone system). I would also like to connect it to asterisk. As far > as I know there is no ISDN card where I can connect an ISDN-Phone to > directly working together with asterisk (please correct me if I'm > wrong). So what I was thinking of doing was to get a regular ISDN > PBX and add a second internal S0 bus which I'd connect to asterisk using > chan_capi. Now to place a call through asterisk I'd first have to dial > into asteriks and then have asterisk give me a dialtone and recognice > dtmf. Is there any way to just prefix the phonnumber with lets say a 9 > and then have the PBX transmit the rest of the number to asteriks so > that I would not have to go through two dialtones? Any suggestions on > what PBX to use if this is possible? It's supposed to be for a private > home so I should not be some really expensive professional one... > > Thank you very much! > Regards > Oliver > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
