[Asterisk-Users] PRI Question

[Barry Porch]

I managed to get Asterisk working with my PBX using T1, now I am moving on to trying to make PRI work.   I have my zaptel.conf and zapata.conf configured as follows:   Zaptel.conf:   span=1,1,0,esf,b8zs bchan=1-23 dchan=24 loadzone=us defaultzone=us   Zapata.conf:   [channels] transfer=yes immediate=yes callprogress=yes   language=en context=default switchtype=national signalling=pri_net group=1 channel=1-23   I have a PRI port provisioned off my PBX to work with the above settings.  When I start up Asterisk everything seems to come up (my PBX “sees” a D-channel) but I get constant output as follows:   == D-Channel on span 1 up   B-channel 2 restarted on span 1   B-channel 3 restarted on span 1   B-channel 4 restarted on span 1   B-channel 5 restarted on span 1   B-channel 6 restarted on span 1   B-channel 7 restarted on span 1   B-channel 8 restarted on span 1   B-channel 9 restarted on span 1   B-channel 10 restarted on span 1   B-channel 11 restarted on span 1   B-channel 12 restarted on span 1   B-channel 13 restarted on span 1   B-channel 14 restarted on span 1   B-channel 16 restarted on span 1   D-Channel on span 1 down   D-Channel on span 1 up   B-channel 2 successfully restarted on span 1   B-channel 3 successfully restarted on span 1   B-channel 4 successfully restarted on span 1   B-channel 5 successfully restarted on span 1   …. And so forth with the D-channel going up and down and various channels “successfully restarting” but inbound calls do not work.   I have tried changing the PRI protocol, I have swapped the CPE and NET settings between the PBX and Asterisk and every combination gives me this same result.   Any thoughts?   Thanks!