Seeing your PBX go down in flames due to bad hardware support... PRICELESS!
On Thu, 21 Aug 2003, Anthony Wood wrote: > Here are some options: > > Digium X100P x 4 > ---------------- > US$100 * 4 = US$400 > well supported by asterisk > manufacturer supports asterisk developers > Deployed in lots of places with Asterisk > > Voicetronix OpenLine4 > --------------------- > US$500? > Use 1 PCI card > reported working with chan_vpb > manufacturer supports linux > Can be used with other software > > Voicetronix OpenSwitch 6(12) > ------------------------ > US$750?(US$1800?) > Use 1 PCI card > works with chan_vpb > manufacturer supports linux > Can be used with other software > 6/12 ports can be jumpered in pairs(4s?) to > be FXO or FXS. > > Channel Bank + T/E 100/400 P > ---------------------------- > US$? > use 1 PCI card > > > On Wed, Aug 20, 2003 at 08:27:06AM -0700, Bruce Ferrell wrote: > > Digium makes a 4 port card. It'd be hard to get 4 lines with quicknet > > hardware. > > > > Bartosz Jozwiak wrote: > > > Hello, > > > > > > Again one more question about hardware. > > > What could you suggest me to buy. > > > I need hardware to connect let's say 4 analog lines. (FXO). > > > This hardware should "talk" to Asterisk of course.. > > > Thanks very much for some advices :) > > > > > > Bartek > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > Woody > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
