On Wed, Aug 20, 2003 at 12:39:49PM -0700, Michael Rose wrote:
> Greetings all..
>
> We have an inbound/outbound PRI installed and terminated on a T400P –
> Digium Quad T1 card. We’re seeing an odd problem when sending
> $CALLERIDNUM when calls from the PRI are forwarded back out to the PSTN
> over the PRI. The $CALLERIDNUM is not being sent out along with the
> call. It’s sending the phone number of the PRI itself, rather than the
> $CALLERIDNUM information.
Is this the scenario you are describing?
You call the office from home, the direct number of a collegue.
He is not in, asterisk forwards it to his mobile.
His mobile rings and gives the PRI number as the caller ID, but you want it to give
out your home number?
>
> Yes, we can send CID info to our PRI provider. If we make a call with
> our Cisco 7960, we can send any phone number we enter into
Even numbers not associated with your PRI?
If you can, then your provider is very trusting, letting you spoof caller ID.
Perhaps your provider will only let you set caller ID to a number in your range of
numbers.
Otherwise, perhaps the provider of the called parties line will only let you provider
send caller id from it's numbers, and your home number (in my example) is not
part of that.
cheers,
Woody
> SetCallerID(). However, if we use SetCallerID(${CALLERIDNUM}) it won’t
> forward the CID number.
>
> [mydid]
> exten => 5558384810,1,SetCallerID(${CALLERIDNUM})
> exten =>
> 5558384810,2,Dial(Zap/g1/15553456131&SIP/[EMAIL PROTECTED]&SIP/[EMAIL PROTECTED],20)
> exten => 2068384810,3,Congestion
>
> Now when I call my DID, 5558384810 from my land line, Asterisk takes the
> CID number and sends it to my IP phones (Cisco 7960) which I can see on
> the display of the IP Phone. However, the CID number doesn’t get sent to
> the cell phone.
>
>
> Below is the context we use to make outgoing calls from our Cisco
> 7960’s. This works fine with our PRI. When I call using the following,
> my cell phone shows the incoming call coming from 2065551212. This tells
> me that our PRI vendor is allowing us to send CID info.
>
> [dialout-pri]
> exten => _1NXXXXXXXXX,1,SetCallerID(2065551212)
> exten => _1NXXXXXXXXX,2,Dial(Zap/g1/${EXTEN},100,T)
> exten => _1NXXXXXXXXX,3,Congestion
> exten => _1NXXXXXXXXX,4,Hangup
>
>
> Here’s what Asterisk shows, when the call is coming in.
>
> -- Executing SetCallerID("Zap/23-1", "5557209085") in new stack
> -- Executing Dial("Zap/23-1",
> "Zap/g1/15557206131&SIP/[EMAIL PROTECTED]&SIP/[EMAIL PROTECTED]|20") in new
> stack
> -- Called g1/15557206131
> -- Called [EMAIL PROTECTED]
> -- Called [EMAIL PROTECTED]
> -- Accepting call from '5557209085' to '5558384810' on channel 23,
> span 1
> -- SIP/69.28.200.84-4698 is ringing
> -- SIP/10.0.1.2-6695 is ringing
> -- Zap/1-1 is ringing
>
>
> Thanks in advance.
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> [EMAIL PROTECTED]
> http://lists.digium.com/mailman/listinfo/asterisk-users
--
Woody
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
