Re: [Asterisk-Users] Question on setting up MeetMe conference bridge

[John Fortman]

I was able to connect two H323 clients in a conference call with only one X100P card.  ztdummy did not compile correctly so I'm only using zaptel.o and wsfxo.o.  The conferencing worked without any special setup on my part so I can't say that it's anything that I've done. ----- Original Message ----- From: Lee Goodman To: [EMAIL PROTECTED] Sent: Thursday, August 21, 2003 10:06 AM Subject: [Asterisk-Users] Question on setting up MeetMe conference bridge So I setup the MeetMe application in Asterisk Assigned an extension to it.   When one of my SIP phone dials the conference extension, they get a message "you are the first one in the conference", so far so good. When the 2nd SIP phone dials the conference extension, they get a busy signal   Now I know that you have to have a Zapta device to enable conference application. I have an X100P (1 port FXO card). So, do you have to have mulitple Zapata devices to enable multiple users in a conference? Do I have to enable the zdummy (dummy zapata code) to run a multiuser conference?     Thanks   Lee Goodman   PS, if someone could send an example configuration, that would be great