I bet you the Ericsson is a little longer in duration.  I need the tone to
take about twice as long as it does.  Now If I could just find that magic
place in rtp.c or chan_sip.c where she lives.

Adam Roach wrote:

I'll point out that the same applies in general to many
commercial PBXes. I can verify from years of personal
experience, for example, that the Ericsson MD110 (probably
the most popular PBX in Europe) exhibits precisely
the same behavior.

/a



-----Original Message-----
From: Eric Wieling [mailto:[EMAIL PROTECTED]
Sent: Friday, August 22, 2003 11:17
To: [EMAIL PROTECTED]
Subject: RE: [Asterisk-Users] DTMF tones not long enough on out going
call s


Have someone using a SIP device with RFC2833 signaling call you, now have the press and hold down one of the dialing keys. You'll hear a short tone then nothing.

On Fri, 2003-08-22 at 11:05, Low, Adam wrote:


Maybe its just me but I find this question a little

confusing, the tone duration should have no impact on tone recognition and typically in my experience the duration of the tone is defined by how long the user holds down the button !?


-----Original Message-----
From: James Sizemore [mailto:[EMAIL PROTECTED] Sent: 22 August 2003 17:33
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] DTMF tones not long enough on out going calls



DTMF tones are not long enough on out going calls, when I'm using either "info" or rfc2833. Does anyone know if the tone length value is in rtp.c or chan_sip.c ?


_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users



********* DISCLAIMER *********

This message and any attachment are confidential and may be

privileged or otherwise protected from disclosure and may include proprietary information. If you are not the intended recipient, please telephone or email the sender and delete this message and any attachment from your system. If you are not the intended recipient you must not copy this message or attachment or disclose the contents to any other person

_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users


--
BTEL Consulting
850-484-4535 x2111 (Office)
504-595-3916 x2111 (Experimental)
877-552-0838 (Backup Phone)

_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users



_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users




_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to