I have seen several config.h and Makefiles with ^M , this is with a fresh checkout from the CVS tree... And I had to clean them with dos2unix. Some file were also not set with "x" execute permissions...
A clean build still eludes me... Ajit Message: 12 From: "Scott Stingel" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Subject: RE: [Asterisk-Users] zaptel compile problems Date: Sat, 23 Aug 2003 12:21:49 -0700 Reply-To: [EMAIL PROTECTED] All four sets (asterisk, libpri, zaptel, and zapata) compile fine under redHat 9.0 (although with lots of warnings) Looking at your /usr/src listing - shouldn't there be separate = directories for asterisk, libpri, zaptel, and zapata? Have you checked that you have all the required packages (listed in the asterisk quick install sheet), and have followed the instructions there? Regards Scott Scott M. Stingel=20 Emerging Voice Technology Inc. Palo Alto, California and London, England -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Saturday, August 23, 2003 2:02 PM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] zaptel compile problems Im sorry, but I would try dumping RedHat kernel. I have never been able = to=20 compile any kernel code with distro kernels. Use Vanilla kernel from=20 ftp.kernel.org FT On Sat, 23 Aug 2003, John Brown wrote: > Hi list, >=20 > I'm having problems getting zaptel to compile. > I'm not a big Linux person and so don't know all the=20 > "nifty" ways RH does things. If this was FreeBSD > it wouldn't be an issue :) >=20 > here is the first few lines from the make >=20 > gcc -I/usr/src/linux-2.4/include -O6 -DMODULE -D__KERNEL__ = -DEXPORT_SYMTAB -I/usr/src/linux/drivers/net -Wall -I. -Wstrict-prototypes -fomit-frame-pointer -I/usr/src/linux/drivers/net/wan -I /usr/src/linux/include -I/usr/src/linux/include/net -DMODVERSIONS = -include /usr/src/linux-2.4/include/linux/modversions.h -DECHO_CAN_MARK2 -DCONFIG_ZAPATA_PPP -DTORMENTA_BASE=3D0xd0000 -DDEFAULT_TONE_ZONE=3D0 -DSTANDALONE_ZAPATA -c zaptel.c > In file included from zaptel.c:34: > /usr/src/linux-2.4/include/linux/kernel.h:60: nondigits in number and = not hexadecimal > /usr/src/linux-2.4/include/linux/kernel.h:60: floating constant = exponent has no digits > /usr/src/linux-2.4/include/linux/kernel.h:60: missing white space = after number `0d5e' > /usr/src/linux-2.4/include/linux/kernel.h:60: parse error before = `0d5e' > /usr/src/linux-2.4/include/linux/kernel.h:60: warning: function declaration isn't a prototype > /usr/src/linux-2.4/include/linux/kernel.h:61: nondigits in number and = not hexadecimal > /usr/src/linux-2.4/include/linux/kernel.h:61: nondigits in number and = not hexadecimal > /usr/src/linux-2.4/include/linux/kernel.h:61: parse error before `01075bf0' > [EMAIL PROTECTED] zaptel]# >=20 > output from uname -a > Linux pbx.joe.tld 2.4.20-20.7 #1 Mon Aug 18 15:05:54 EDT 2003 i686 = unknown >=20 > ls of /usr/src: >=20 > [EMAIL PROTECTED] zaptel]# ll /usr/src > total 20 > drwxr-xr-x 5 root root 4096 Aug 22 19:07 . > drwxr-xr-x 16 root root 4096 Aug 9 15:58 .. > lrwxrwxrwx 1 root root 17 Aug 22 19:07 linux-2.4 -> linux-2.4.20-20.7 > drwxr-xr-x 14 root root 4096 Aug 22 19:07 = linux-2.4.20-19.7 > drwxr-xr-x 16 root root 4096 Aug 23 12:24 = linux-2.4.20-20.7 > drwxr-xr-x 7 root root 4096 Aug 9 15:57 redhat > [EMAIL PROTECTED] zaptel]# >=20 > not sure whatelse to include. >=20 > AST compiles fine >=20 >=20 > Mucho thanks _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
