Hi Adam, the telco is not sending CallerID to your line. Otherwise you would find a "Calling Party Number IE" in the SETUP message.
regards kapejod -- Klaus-Peter Junghanns CEO,CTO Junghanns.NET GmbH Breite Strasse 13 - 12167 Berlin - Germany fon: +49 30 79705392 fax: +49 30 79705391 iaxtel: 1-700-157-8753 email: [EMAIL PROTECTED] http://www.junghanns.net/asterisk Am Mon, 2003-08-25 um 13.19 schrieb Adam Goryachev: > Can anyone work out why my callerid doesn't work on my isdn4Linux with > asterisk (or without asterisk for that matter)... > > This used to work fine, and I am quite confident that the telco is sending > callerid information (because they always do on all ISDN lines standard, > only extra cost on POTS lines). > > This is the information from dmesg, whether asterisk is running or not: > isdn_net: Incoming call without OAD, assuming '0' > isdn_net: call from 0 -> 0 xxxxxxxx ignored > > where xxxxxxxx is my local phone number without area code > I turned on the maximum isdn debugging, and here is the output when I dial > in, at this time, asterisk was not running... > > 29:42.76 Card1 tiger: i1 2 80 > 29:42.76 Card1 ISAC interrupt 80 > 29:42.76 Card1 isac_empty_fifo cnt 4 02 81 01 3B > 29:42.76 Card1 <- PH_DATA: RR[1](nr 29)C (sapi 0, tei 64) > HEX: 02 81 01 3B > 29:42.76 frame network->user SFrame with tei 64 > 29:42.78 Card1 tiger: i1 2 80 > 29:42.78 Card1 ISAC interrupt 80 > 29:42.78 Card1 isac_empty_fifo cnt 4 00 81 01 3B > 29:42.78 Card1 <- PH_DATA: RR[1](nr 29)R (sapi 0, tei 64) > HEX: 00 81 01 3B > 29:42.78 frame network->user SFrame with tei 64 > 29:45.87 Card1 tiger: i1 2 80 > 29:45.87 Card1 ISAC interrupt 80 > 29:45.87 Card1 isac_empty_fifo cnt 31 02 FF 03 08 01 03 05 A1 04 03 80 90 A3 > 18 01 8A 70 09 C1 39 36 39 34 31 31 30 30 7D 02 91 81 > 29:45.87 Card1 <- PH_DATA: UI[0]C (sapi 0, tei 127) > HEX: 02 FF 03 08 01 03 05 A1 04 03 80 90 A3 18 01 8A 70 09 C1 39 36 39 34 31 > 31 30 30 7D 02 91 81 > 29:45.87 frame network->user broadcast > callref 3 caller size 28 message type SETUP > Sending complete > Bearer capability > octet 3 10000000 > octet 4 10010000 > octet 5 10100011 > Channel identification > octet 3 10001010 > Called party number > octet 3 11000001 > number digits 96941100 > High layer compatibility > octet 3 10010001 > octet 4 10000001 > 29:45.87 DCh Q.921 State ST_L2_1 Event EV_L2_UI > 29:45.87 Ch0 callc State ST_NULL Event EV_SETUP_IND > 29:45.87 Ch0 callc ChangeState ST_IN_WAIT_LL > 29:45.87 Ch0 HL->LL STAT_ICALL > 29:45.87 Ch0 LL->HL statcallb ret=0 > 29:45.87 L3DC State ST_L3_LC_REL Event EV_RELEASE_REQ no routine > 29:45.87 Ch0 callc ChangeState ST_NULL > 29:49.92 Card1 tiger: i1 2 80 > 29:49.92 Card1 ISAC interrupt 80 > 29:49.92 Card1 isac_empty_fifo cnt 31 02 FF 03 08 01 03 05 A1 04 03 80 90 A3 > 18 01 8A 70 09 C1 39 36 39 34 31 31 30 30 7D 02 91 81 > 29:49.92 Card1 <- PH_DATA: UI[0]C (sapi 0, tei 127) > HEX: 02 FF 03 08 01 03 05 A1 04 03 80 90 A3 18 01 8A 70 09 C1 39 36 39 34 31 > 31 30 30 7D 02 91 81 > 29:49.92 frame network->user broadcast > callref 3 caller size 28 message type SETUP > Sending complete > Bearer capability > octet 3 10000000 > octet 4 10010000 > octet 5 10100011 > Channel identification > octet 3 10001010 > Called party number > octet 3 11000001 > number digits 96941100 > High layer compatibility > octet 3 10010001 > octet 4 10000001 > 29:49.92 DCh Q.921 State ST_L2_1 Event EV_L2_UI > 29:49.92 Ch0 callc State ST_NULL Event EV_SETUP_IND > 29:49.92 Ch0 callc ChangeState ST_IN_WAIT_LL > 29:49.92 Ch0 HL->LL STAT_ICALL > 29:49.92 Ch0 LL->HL statcallb ret=0 > 29:49.92 L3DC State ST_L3_LC_REL Event EV_RELEASE_REQ no routine > 29:49.92 Ch0 callc ChangeState ST_NULL > 29:52.80 Card1 tiger: i1 2 80 > 29:52.80 Card1 ISAC interrupt 80 > 29:52.80 Card1 isac_empty_fifo cnt 4 00 81 01 3B > 29:52.80 Card1 <- PH_DATA: RR[1](nr 29)R (sapi 0, tei 64) > HEX: 00 81 01 3B > 29:52.80 frame network->user SFrame with tei 64 > 30:02.83 Card1 tiger: i1 2 80 > 30:02.83 Card1 ISAC interrupt 80 > 30:02.83 Card1 isac_empty_fifo cnt 4 00 81 01 3B > 30:02.83 Card1 <- PH_DATA: RR[1](nr 29)R (sapi 0, tei 64) > HEX: 00 81 01 3B > 30:02.83 frame network->user SFrame with tei 64 > > Any hints/clues would be very handy, as it is kind of annoying to have > callerid available but not be able to make use of it... > > Regards, > Adam > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
