Hi, read /usr/src/linux/Documentation/networking/netlogging.txt
regards kapejod -- Klaus-Peter Junghanns CEO,CTO Junghanns.NET GmbH Breite Strasse 13 - 12167 Berlin - Germany fon: +49 30 79705392 fax: +49 30 79705391 iaxtel: 1-700-157-8753 email: [EMAIL PROTECTED] http://www.junghanns.net/asterisk Am Mon, 2003-08-25 um 16.50 schrieb Mike Ciholas: > > On Mon, 25 Aug 2003, Gavin Hollinger wrote: > > > Thanks Mark, Sorry for all the questions, I am treading on > > un-familiar ground here. Can anyone think of a way to adjust > > how long the serial console holds the interrupt when the kernel > > sends a message? Anyone know what the purpose of this behavior > > is? > > Here are some uneducated thoughts: > > 1. Make serial port polled instead of interrupt driven? Majority > of traffic is output that will be buffered. > > 2. Increase serial port buffer size? Perhaps problem is so much > serial output that buffer fills up and blocks. > > 3. Make serial port faster? Would help drain buffer quicker. > 115200 baud is routine, I've seen 460800 baud being used for > embedded Linux on short cables. > > 4. Is there a way to have a remote console via ethernet? Won't > help with BIOS settings, but would remove serial port issues. > > 5. Use different serial port hardware (USB serial dongle, PCI > multiport card, etc) for console. Switch serial cable to do BIOS > settings if need be. > > What BIOS do you have that is serial configurable? I'm always on > the lookout for that. > > -- > Mike Ciholas (812) 476-2721 voice > CIHOLAS Enterprises (812) 476-2881 fax > 2626 Kotter Ave, Unit D [EMAIL PROTECTED] > Evansville, IN 47715 http://www.ciholas.com > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
