I have just received a T100P and an Adtran TSU 600 in the mail. I seem to be having a problem with the T100P card. So far I have done the following:
vi zaptel.conf fxoks=1-22 fxsks=23-24 ... vi zapata.conf ... signalling=fxo_ks ... channel => 1-22 ... signalling=fxs_ks ... channel => 23-24 I then run modprobe zaptel modprobe wct1xxp ztcfg -vv There are no errors to report. In /proc/zaptel/1 all of the configured channels are listed. However, I do not have an LED lit up on the T100P. To me, it makes sense that the green LED sould be lit up when the driver is loaded (like the TDM400P). Is an LED supposed to be lit up? Do I have my zaptel/zapata.conf files configured correctly? If I run the self test on my channel bank, I can get a dial tone on all phones plugged into it until it tries to check the T1 link. This triggers an Alarm and kills all of the dial tones. Any help is always appreciated. __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
