Hi Brian,
Not getting to that stage as yet. I just want to confirm the contents of
h323.conf - mainly. Should the Cisco gateway be defined as something like:
[CiscoGW]
type=friend
context=default
host=10.0.0.200
or don't I need to define this here?
Should I then be addressing the gateway as:
exten => 5000,1,Dial(h323/[EMAIL PROTECTED])
??????
Thanks,
Regards,
Steven Thomas
Visit us at http://www.ibm.com/services/au/its
Brian West <[EMAIL PROTECTED]>
Sent by: To: [EMAIL PROTECTED]
[EMAIL PROTECTED] cc:
.digium.com Subject: Re: [Asterisk-Users]
Chan_h323 and a Cisco Gateway
26-08-03 04:26 PM
Please respond to
asterisk-users
Well depends.. what kind of problem are you having?
http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a0080093f62.shtml
http://www.cisco.com/en/US/tech/tk652/tk701/technologies_problem_troubleshooting09186a00800c5e33.shtml
Check those... I suspect one of those has nailed ya.
If you have PRI and you try to terminate outbound via chan_h323 you must
have "bearer-cap speech" on your voice-ports. Because chan_h323 isn't
sending the appropriate bearer cap in the H.225 SETUP message.
Hours of beating head on desk and searching... Hope this helps.
Thanks,
Brian
On Tue, 26 Aug 2003, Steven Thomas wrote:
>
>
>
>
> Hi,
>
> Can anyone tell me what should be included in h323.conf to get asterisk
to
> talk to a Cisco 2600 gateway? Any statement examples for extensions.conf
> would also be appreciated. Thanks.
>
> Will chan_h323 use the Cisco as a gateway anyway?
>
>
> Regards,
>
> Steven Thomas
>
> _______________________________________________
> Asterisk-Users mailing list
> [EMAIL PROTECTED]
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
